Spare Parts - Hard Tail - Dyson Bikes

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Dyson Bikes

Hard Tail

Here you'll find spare parts specific to the Dyson Bikes 'The Hard Tail' e-bike.

If you can't find the part you need here, it doesn't mean it is not available - more likely is that we haven't had a chance to list it yet.

Owner's manual can be found by clicking here.

 

Seeing an error code? Here is a guide to what this may mean:

21 Electric current abnormality - Check to see if  plugs are connected correctly or have been damaged.

22 Throttle abnormality – If a throttle is fitted, holding on while turning on can cause this to appear.

23 Motor open-phase – This error is often a result of a connection error the controller and the motor. Check to see if all plugs are connected properly or have been damaged. Make sure to align the arrows to prevent a pin from being bent.

24 Motor hall signal – This error is often a result of a connection error the controller and the motor. Check to see if all plugs are connected properly or have been damaged. Make sure to align the arrows to prevent a pin from being bent.

25 Brake abnormality – This will appear if holding down on the brake while turning the E-bike on or if a brake lever has been bent causing it to not return correctly.

30 Communication abnormality – This error is often a result of a connection error between the display and the controller. Check to see if all plugs are connected properly or have been damaged. This may also be caused by a faulty display.

batt LU – This error is may be caused by a low button batteries in the display.

dyson-bikes-hard-tail-electric-bike-blue-600x600.jpg