Knog PWR 700 Front + Link Saddle Rear Light COMBO
RRP $234.90
19% OFF
RRP $234.90
19% OFF
PWR ROAD 700 LUMEN FRONT LIGHT
PWR Road is a modular light for use on your electric bike or bicycle. But it’s not JUST another bike light. Not only is it a high powered bike light, but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range.
Hate it when you run out of battery with no warning? That’ll never happen with PWR Road, with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged, 2 lights = half charged etc.
This light can be mounted on top or below your handlebars, directly under your Garmin, or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted, using PWR Road is a breeze. It’s a simple twisthead operation to turn light on & off and to scroll through light modes
Press the red button to release the light head, and use the PWR bank to charge your phone, GoPro, cycle computer or other device. Charge your PWR Road using the included micro USB cable.
PWR Road outputs a max 600 lumens, and can run for up to 195 hours on Eco Flash Mode. Its elliptical beam gives broader, bright road coverage. It comes with 6 pre-program d modes, and you can program the light to suit your needs with Modemaker. You can control brightness, adjust runtimes and add new light modes.
Weight 125 grams
LINK SADDLE MOUNTED REAR LIGHT
The Blinder Link Rear Bike Light is an innovative and powerful light designed to grab the attention of other road users, and be a pleasure to use. Available in two practical mounting options:
Blinder Link Rack tackles the problem that using racks can often obscure the riders rear lights, mounting on the back of the rack.
Blinder Link is an impressive bike light that's simple to use, while being stacked with innovative features that you'll love.
Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.
Blinder Link has a unique clip design that allows a rider to quickly & easily remove or attach the light from the mount.
When low on battery the lights beside the button will glow red. When charging, the lights will turn green and then turn off once charged.
BULB TYPE Chip On Board (COB) LEDs
LIGHT OUTPUT RANGE Steady On - High: 100 lm, Steady On - Low: 20 lm
LIGHT MODES 8
PROGRAMMABLE WITH MODEMAKER No
LOW BATTERY INDICATOR Yes
RUN-TIME High: 50 hrs, Low: 4 hrs
CHARGE TIME 4 hrs
RECHARGEABLE Yes (USB-C) - No charger/cable included.
WEIGHT 74 g / 2.6 oz
DIMENSIONS H: 51mm x W: 44mm x L: 77mm
WATERPROOF Yes, IP67 rating
OPERATING TEMP -20 to 50 °C / -4 to 122 °F
OPTIMUM CHARGING TEMP 20 to 22 °C / 68 to 72 °F (Room Temperature)
| SKU | 801059 |
| Brand | Knog |
| Shipping Weight | 0.6000kg |
PWR ROAD 700 LUMEN FRONT LIGHT
PWR Road is a modular light for use on your electric bike or bicycle. But it’s not JUST another bike light. Not only is it a high powered bike light, but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range.
Hate it when you run out of battery with no warning? That’ll never happen with PWR Road, with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged, 2 lights = half charged etc.
This light can be mounted on top or below your handlebars, directly under your Garmin, or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted, using PWR Road is a breeze. It’s a simple twisthead operation to turn light on & off and to scroll through light modes
Press the red button to release the light head, and use the PWR bank to charge your phone, GoPro, cycle computer or other device. Charge your PWR Road using the included micro USB cable.
PWR Road outputs a max 600 lumens, and can run for up to 195 hours on Eco Flash Mode. Its elliptical beam gives broader, bright road coverage. It comes with 6 pre-program d modes, and you can program the light to suit your needs with Modemaker. You can control brightness, adjust runtimes and add new light modes.
Weight 125 grams
LINK SADDLE MOUNTED REAR LIGHT
The Blinder Link Rear Bike Light is an innovative and powerful light designed to grab the attention of other road users, and be a pleasure to use. Available in two practical mounting options:
Blinder Link Rack tackles the problem that using racks can often obscure the riders rear lights, mounting on the back of the rack.
Blinder Link is an impressive bike light that's simple to use, while being stacked with innovative features that you'll love.
Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time.
Blinder Link has a unique clip design that allows a rider to quickly & easily remove or attach the light from the mount.
When low on battery the lights beside the button will glow red. When charging, the lights will turn green and then turn off once charged.
BULB TYPE Chip On Board (COB) LEDs
LIGHT OUTPUT RANGE Steady On - High: 100 lm, Steady On - Low: 20 lm
LIGHT MODES 8
PROGRAMMABLE WITH MODEMAKER No
LOW BATTERY INDICATOR Yes
RUN-TIME High: 50 hrs, Low: 4 hrs
CHARGE TIME 4 hrs
RECHARGEABLE Yes (USB-C) - No charger/cable included.
WEIGHT 74 g / 2.6 oz
DIMENSIONS H: 51mm x W: 44mm x L: 77mm
WATERPROOF Yes, IP67 rating
OPERATING TEMP -20 to 50 °C / -4 to 122 °F
OPTIMUM CHARGING TEMP 20 to 22 °C / 68 to 72 °F (Room Temperature)
| SKU | 801059 |
| Brand | Knog |
| Shipping Weight | 0.6000kg |
Copyright © 2023 Dyson Bikes.
ABN: 211 656 485 00
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Dyson Bikes’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Dyson Bikes’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 20, 85 Keys Road, MOORABBIN VIC 3189. Our ABN is 211 656 485 00. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we use and protect any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please email us as soon as possible at [email protected]. We will promptly correct any information found to be incorrect.
We take all reasonable steps to keep secure any information which we hold about you. Personal information may be stored both electronically on our computer system, and in hard-copy form. Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
