Restrap Switch Rack 1.5mm
RRP $274.99
5% OFF
RRP $274.99
5% OFF
Built on Restrap’s philosophy of engineered minimalism, the Switch Rack combines a lightweight design with durable materials and simple, tool-friendly installation.
As the core of the Switch system, it is compatible with Switch Panniers, Switch Multi-Mount products, and any accessories using 64 mm spaced mounts, such as bottle cages. Supplied with all required mounting hardware, it is ready to fit and ride.
Features:
– Lightweight aluminium alloy construction.
– High Grade 7075-T6 aluminium axles in 1.5mm thread pitch.
– Multiple 64mm-spaced mounting points.
– Compatible with Restrap Switch products.
– 25mm velcro strap to fit all seat post sizes and shapes.
– Quick flip system provides maximum wheel clearance across all bike sizes.
Which axle do you need?
– All Switch Racks come with an axle supplied. This is designed to replace the one current axle. It is compatible with 142mm and 148mm (boost) spacing and comes supplied with spacers to tune fit.
– It is imperative to use the correct thread pitch for your frame.
– To determine the correct thread pitch, remove your current axle. Many have the thread pitch printed on the axle. It will be either 1mm, 1.5mm or 1.75mm.
– If it is not printed on the axle, you will need a ruler. Count out ten threads from the end of the axle and measure the distance. If it is 1cm, you have a 1mm thread pitch. 1.5cm = 1.5mm thread pitch, 1.75cm = 1.75mm.
– If you are still unsure, check with your frame manufacturer directly.
Fitting the Switch axle:
– Remove your bike’s current thru-axle.
– Remove M5 bolts from both ends of Restrap Switch thru-axle.
– Fit the Restrap Switch thru-axle using a 6mm allen key. Use as many 3mm washers as necessary to centralise the top bar over the rear wheel.
– Use the supplied axle cone spacer for compatible frames.
Fitting the Switch Rack:
– Slot rack legs over either end of the axle.
– Screw in M5 bolts to secure.
– Ensure the rubberised fabric strap is tightly wrapped around the seatpost or seat tube.
– Use velcro strap to tightly secure the seatpost/tube mount.
– Tighten all bolts.
Tailoring fit:
– Quick flip system allows you to flip the top bar to maximise wheel clearance and provide a range of seat post or frame mounting points.
– Simply rotate the top bar and ensure it is centralised.
– Remove the velcro strap from the seatpost/tube clamp and rethread to ensure the Restrap logo tab is on the drive side (because aesthetics are important)
Compatibility:
– Only compatible with bikes with a 12mm diameter thru-axle.
– Compatible with bikes with 142mm or 148mm (Boost) spacing.
– Not designed for use with full-suspension frames.
– IMPORTANT – ensure axle thread pitch matches your bike. Do not attempt to fit without the correct thread pitch.
– UDH – bikes with a UDH derailleur will require a Restrap Switch UDH adaptor (available separately).
– SRAM Transmission/T-Type direct mount derailleurs will require a Restrap Switch Full Mount adaptor (available separately).
Spares:
– High Grade 7075-T6 aluminium axles in 1mm, 1.5mm and 1.75mm thread pitch are available separately
– Weight: 395g (without axle and bolts), 485g (including axle and bolts)
| SKU | 103933 |
| Barcode # | 5060367884953 |
| Brand | Restrap |
| Shipping Weight | 2.0000kg |
| Axle Pitch | 1.5mm |
Built on Restrap’s philosophy of engineered minimalism, the Switch Rack combines a lightweight design with durable materials and simple, tool-friendly installation.
As the core of the Switch system, it is compatible with Switch Panniers, Switch Multi-Mount products, and any accessories using 64 mm spaced mounts, such as bottle cages. Supplied with all required mounting hardware, it is ready to fit and ride.
Features:
– Lightweight aluminium alloy construction.
– High Grade 7075-T6 aluminium axles in 1.5mm thread pitch.
– Multiple 64mm-spaced mounting points.
– Compatible with Restrap Switch products.
– 25mm velcro strap to fit all seat post sizes and shapes.
– Quick flip system provides maximum wheel clearance across all bike sizes.
Which axle do you need?
– All Switch Racks come with an axle supplied. This is designed to replace the one current axle. It is compatible with 142mm and 148mm (boost) spacing and comes supplied with spacers to tune fit.
– It is imperative to use the correct thread pitch for your frame.
– To determine the correct thread pitch, remove your current axle. Many have the thread pitch printed on the axle. It will be either 1mm, 1.5mm or 1.75mm.
– If it is not printed on the axle, you will need a ruler. Count out ten threads from the end of the axle and measure the distance. If it is 1cm, you have a 1mm thread pitch. 1.5cm = 1.5mm thread pitch, 1.75cm = 1.75mm.
– If you are still unsure, check with your frame manufacturer directly.
Fitting the Switch axle:
– Remove your bike’s current thru-axle.
– Remove M5 bolts from both ends of Restrap Switch thru-axle.
– Fit the Restrap Switch thru-axle using a 6mm allen key. Use as many 3mm washers as necessary to centralise the top bar over the rear wheel.
– Use the supplied axle cone spacer for compatible frames.
Fitting the Switch Rack:
– Slot rack legs over either end of the axle.
– Screw in M5 bolts to secure.
– Ensure the rubberised fabric strap is tightly wrapped around the seatpost or seat tube.
– Use velcro strap to tightly secure the seatpost/tube mount.
– Tighten all bolts.
Tailoring fit:
– Quick flip system allows you to flip the top bar to maximise wheel clearance and provide a range of seat post or frame mounting points.
– Simply rotate the top bar and ensure it is centralised.
– Remove the velcro strap from the seatpost/tube clamp and rethread to ensure the Restrap logo tab is on the drive side (because aesthetics are important)
Compatibility:
– Only compatible with bikes with a 12mm diameter thru-axle.
– Compatible with bikes with 142mm or 148mm (Boost) spacing.
– Not designed for use with full-suspension frames.
– IMPORTANT – ensure axle thread pitch matches your bike. Do not attempt to fit without the correct thread pitch.
– UDH – bikes with a UDH derailleur will require a Restrap Switch UDH adaptor (available separately).
– SRAM Transmission/T-Type direct mount derailleurs will require a Restrap Switch Full Mount adaptor (available separately).
Spares:
– High Grade 7075-T6 aluminium axles in 1mm, 1.5mm and 1.75mm thread pitch are available separately
– Weight: 395g (without axle and bolts), 485g (including axle and bolts)
| SKU | 103933 |
| Barcode # | 5060367884953 |
| Brand | Restrap |
| Shipping Weight | 2.0000kg |
Copyright © 2026 Dyson Bikes.
ABN: 35 737 766 440
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Dyson Bikes’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Dyson Bikes’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 20, 85 Keys Road, MOORABBIN VIC 3189. Our ABN is 35 737 766 440. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we use and protect any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please email us as soon as possible at info@dysonbikes.com.au. We will promptly correct any information found to be incorrect.
We take all reasonable steps to keep secure any information which we hold about you. Personal information may be stored both electronically on our computer system, and in hard-copy form. Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
